Product Categories
Contact Us
TEL: 86-512-66708590
E-mail: jyc@chinanewstyle.com
Address: Wang Tingzhen Xinhua Industrial Management District Wanfang Road, Wangcheng Town, Suzhou City, Jiangsu Province
Home > Exhibition > Content
Self-lifting platform maintenance
May 08, 2017

1. Before use, should be empty up a times, observe each part is normal, if there are defects, should cease to use; Pay professional maintenance personnel debugging.

2. In the maintenance and cleaning up the lifting platform, in the prop up the security struts.

3. When the electricity displays less than 40%, to recharge in time. To check the battery water, if it is less than 20ml, you have to add water.

4. Electrical appliances and hydraulic systems should be maintained by professionals.

5. The equipment is used for about 2 months (depending on the actual frequency) to add a lubricating grease to the rotating site.

6. Periodically check the work status of the hydraulic elevator pin shaft monthly, such as found pin fastening screw loose, must pin tight, prevent shaft pin shedding cause accidents.

7. Hydraulic oil should be kept clean and replaced every 6 months.

8. Indoors, external use should be noted that in the outdoor use of the geological hard ground to avoid subversion, every use of 20 times to adjust the chain screw, adjust a rope screw, in use, can not stop at the slope greater than 30 ° to work in case the elevator falls.


Previous: Common problems in aerial work platforms

Next: Which is the better of the curved arm and the straight arm?